my dad wants to catch bass i want to catch catfish and my friend wants to catch anything (hes really bad and so is my dad) i know how to catch cats but im not sure how to catch bass we will be out from 9:00 am- 5:00 pm what are some good fish to catch between those times and what should i use for bass and walleye aslo i want to catch monster bluegill but nt as much there will be isolated rain storms all day so is that good for a poper looks like this http://www.lakecountybass.com/images/topwater-lrg.jpg (the one on the bottom with the silver) i hope i have provided all the neccisary info but if there is anything else fell free to e-mail me and ask but remember i only have til tonight to see these answers
Lake lanier is such a large lake with so many different areas to fish that are so diverse. What I would do is use a search bait, A spinner usually works. once you find where bass are holding turn down the speed. I would throw a Senko worm. You can fish this worm on a gamakatsu 2/0 weedless worm hook. just throw this worm along the areas you find bass and let it sink on its own then when it hits bottom give it a yank or two then let it sink again.
Top water will work better in the early morning. I would start by throwing a jitterbug or zara spook. just pop or pull them along the top. if that gets little action the go to a buzzbait. if the buzzbait doesn't work then the fish have gone deeper. Try a deep diving crank bait. Shad and blue back herring are prevelant in Lanier so throw something in that color. try to stay in 10 -15 feet of water close to some type of cover ie. fallen trees in the water or grass beds that mat the top of the water. Also, that senko will work along the top of weed beds, grass, and lilly pads with little to no snagging if you hook your gamakatsu hook properly.
the top lure on that page looks like a Rapala in shad color it's a floater/diver... it dives about 3 feet
your second lure looks like a heddons torpedo and is a descent top water.
the rapala popper on the bottom will also work on top water
good luck
Water Proof Motorcycle Designs for building a ramp for my backyard shed.?
I have a nice 20 x 20 shed that needed a new strong ramp. I'll be building it myself and want it to have a load limit of 1,000 pounds so I can wheel my motorcycle into it. I'm sure the old ramp got wet and stayed wet, so I'm planning on spacing the 2 x 6 so they will not remain water-logged. The original had the 2 x 6's on their side and I think I'm going to be following that lead, with some water-proofing each year.
The problem is the 2x6's on "their side". Board fibers are run the other way and placing them on the flat side up/down. reduces the capacity to nil over time. Six 2x6's placed vertically 12-18" apart with 2 layers of 3/4" plywood over the top and screwed in with exterior screws and painted once will last 10 years before repainting and will never go bad in 30 years and will carry 1000 lbs all day every day.
Sidi Canyon Gore Tex Waterproof Motorcycle Boots at revzilla.com
Soft saddle bags are popular because they are pliable, easier to lug around and very spacious. There are a large number of soft saddlebags available in the market which makes selection difficult. Here's a shortlist of some of the good bags:
1. Chase Harper European Tour Saddlebags: These are made of Cordura, are water-tight and have 34 quart capacity. Their important features are: attachment around the rear and at the footpegs, a frame tube with quick-release action, hard plastic at the bottom and front, removable plastic exhaust guards, soft nylon backing to prevent scuffing and double nylon handles joined by wraparound leather
2. Dry Bag Saddlebags: These are made of pliable non-porous plastic, are Cordura lined and can roll up like a paper sack. They have hard plastic bag stiffeners, an attachment around the rear and at the footpegs , quick-release buckles on nylon straps and a hard plastic backing
3. Eclipse Dodge Slant Cruiser Bags: They have a nylon body, faux leather top flap and real leather straps and trims. They are highly functional and compact, have rigid inner support panel, soft tricot mesh on the surface facing the bike as well as under the wide seat yoke. They need saddlebag support frames for proper attachment
4. Hondaline Saddlebags: These bags are made of nylon and foam panels and are water proof. They have a top that opens, are easy to pack and carry and can be attached to the bike using a nylon strip.
5. OSI Deluxe Nylon Saddlebags: These bags are made of Cordura and are open at the top. They have a large external pocket and a zipper with nylon tabs for easier pulling. The main compartments of the bags are lined with nylon and stiff plastic. The bags also have a flexible foam support on the side walls. They have four detachable anchor points and rugged Cordura handles for easy carrying
6. Rev-Pack Deluxe Saddle Packs: They are made of heavy urethane-coated Cordura
lined with sealed nylon. In addition, there is a lining of foam between the two plies for insulation and stability. The front flap is large and stiff. The bags can be moved up or down using the harness system that runs over the rear seat
7. RKA Standard Saddlebags: These bags have 22.5 quarts capacity, solid mounting and come with dual straps that tighten down across the seat. The zips open like a suitcase. They have adjustable retaining straps and synthetic sheepskin finish.
8. Roadgear Jumbo Expedition Bags: These bags have 40.8 quarts capacity and are made of 1000-denier Cordura Plus fabric with expanding panels. The bags have nylon-loop straps for the rear footpegs, a quick-release nylon tail strap and can be easily levelled with the passenger seat or raised above.
9. Teknic Saddlebags: These bags are made of 420-denier nylon, are PVC-coated and have a capacity of 35.2 quarts. A wide hook-and-loop yoke over the seat is used to join the saddlebags that have a four-point quick-release system to secure the bags to the bike. They also have an additional common strap for carrying the bag over the shoulder.
a wraparound zipper and two adjustable quick-release straps. A spiral-type zipper system helps release additional inches of cargo space.
About the Author
James Gunaseelan Writes articles & Reviews for India's No.Auto Portal
.He also advises consmers on buying & selling of used cars & Automobiles in India.
Seems to be only mainly Pentax + Olympus putting in any effort at truly waterproof cameras that don't NEED seperate protective covers....... there's a list of reviews of what else is available here:
http://www.steves-digicams.com/cameras_wr.html
I also reckon the DSLR suggestions probably wouldn't be the wisest choice for going surfing with, as not only would they get in the way and bug the hell out of you, but SLR's tend to be rather heavy and could cause you to end up drowning if you end up falling off the board with it hanging round ur neck weighing you down.
First, purchase a non-porous ceramic pot, or metal holder with a diameter no less than 10 and 5 inches in depth to accomodate the pump. The 10 inches in diameter is to hold the interesting top scenery. Remember textures and colors are important. You can find materials anywhere with a little imagination. Such as river stones, pebbles, Spanish Moss, handcrafted small shrubs, plants, flowers…. Or you can go to your local aquarium store for interesting water decorations for the tank and use those. The combinations are endless!
Second, decide on the theme and sketch a basic layout of your waterfountain.
Third, when you have decides on the decorative layout of your water fountain. You are now ready to provide your decorations with a foundation or platform to adhere. Your platform of course will cover the water pump. Create a small hole in the platform above for the hose to come out. Make sure it is undetected going up along side a graduated flower or plant upright in the container to cause water to flow downward.
Fourth, the platform can be made of the material you will find in flower shops arrangements. It's a green porous light weight material. Easy to make a hole, but because of its porous nature, but please becareful, small particles from this material can clog the pump once water is introduced at the base of the container. Using a strong water-proof glue, you can glue shells, pepples, or on Spanish Moss to give your fountain a full and finished look.
Fifth, fill the container with water. Plug in the pump, then sit back and relax to the soothing sounds of flowing water. You can carefully bubble wrap it and send it through the mail, marked "Fragile" of course, to its new home as a gift.
What are the benefits of an indoor water fountain?
1.Keeps indoor air quality hydrated.
2.Gently purifies and recycles air.
3.Soothes harried nerves
4.Thoughtful but inexpensive gift
5.Great social focal point for guests
6.Water fountains is conducive to relaxation and sleep
7.Great alternative to white noise to drowning out annoying sounds. What better way to do it naturally but through the power of gentle flowing water.
8.The hydration in the surrounding air promotes free breathing but provides proper air moisture for healthy plant growth.
Materials Needed:
1.A container at 10 inches wide and 5 inches deep: non-porous ceramic pot, a metal container, or anything else that can hold water. The dimensions are guidelines.
2.Platform sponge from your local flower shop to hold your scenic decorations on top.
3.Electrical water pump.
4.Strong Water proof glue. See hardware stores.
5.And, of course, your theme materials such as: pebbles, river stones, Spanish Moss and various handcrafted plants for longevity.
et viola! You now have your first handcrafted water fountain.
By: Marjorie at www.jewelscorner.org
About the Author
Part owner of Family Business aka jewelscorner.org. We specialize in Indoor and Garden Water Fountains, Scented Candles, various Aromatherapy products at below retail price. We provide FREE shipping and handling via UPS Ground Service. We are located on the web at: http://www.jewelscorner.org.
Water Proof What can I use to water proof lumber ?
I have some used 2"x6" lumber that is in very good condition. I would like to use this lumber to build a dock. The dock will be on 55 gal plastic drums for floatation. What can I use on this lumber to water proof it?
An MP3 player is a device that plays recordings in a MP3 format. Specifically, a MP3 format means that the original recording is compressed significantly which decreases the data need to store the recording and yet still maintain the integrity and quality of either the music or the voice.
In addition, there are many MP3 players on the market today. Some of these players are designed with the sport enthusiast in mind. These types of players can be strapped to the arm or can be built into a headset. Additionally, there are many features that different MP3 players can be equipped with.
One of the biggest features is the amount of memory built into the MP3 player. For example, some MP3 players are equipped with 1GB of memory. This amount of memory will effectively hold around 240 songs. Other MP3 players may have greater memory capacity and may range up to 4GB which translates into four times the amount storage over a 1GB memory device.
One other specific design that may be important to the customer is the inclusion of waterproof MP3 player accessories. One of those accessories is a MP3 player water proof case. Therefore, if considering the purchase of an MP3 player it may prove beneficial to discuss how a MP3 player can be waterproofed and the benefits of a MP3 player water proof feature.
How a MP3 Player is Waterproofed
Generally, a MP3 player water proof casing is built from strong material known a polycarbonate. Not only does the use of this material help in the waterproofing of the device, but helps to protect the player from accidental shock caused by another object hitting it or if it is dropped.
Additionally, the MP3 player water proof case holds the player in a perfectly formed area. Once the player is placed in the compartment of the MP3 player water proof case the unit snaps tightly together.
In addition, it is important to note that the proper MP3 player water proof case must be matched properly to the device. Therefore, it is important to purchase the right waterproof case that matches the design of the MP3 player.
Benefits
There are many benefits associated with the use of a MP3 player water proof case. One of those benefits is that the musical playing device can be used without worry around water. Examples can include playing the device around swimming pools, while boating, at the beach, etc. In addition, the use of the MP3 player water proof case allows for the player to be used in the shower.
This can be accomplished as the player is placed securely in the polycarbonate casing. In addition, two speakers are built into the product which allows for the music to be played while the player is protected from the water.
Proof Motorcycle Can Someone take back a Motorcycle that was a gift even though the title isnt in their name?
My boyfriends dad just broke up with his girlfriend after 2 1/2 years, a couple Christmas' ago she bought him a motorcycle as a gift. The title is in his name and no money is owed on it. She has proof that she bought it and she is threatening to take it. Can she legally do that even though it is in his name?
She's wasting her time. A "gift" canNOT be taken back.
She stopped being the owner since the moment she handed the key and registration to him. It doesn't matter if she paid for it; as a matter of fact he doesn't need to deny she paid for the bike: that's why it's a gift. The bike belongs to him. That has been seen in court many times.
The only thing that can be taken back are engagement rings, because they are not "gifts", they are a "promise of marriage" so if you call off the wedding then you have to return the ring.
black rebel motorcycle club ( steal a ride ) death proof
If you rent a car, you HAVE TO show proof of insurance right???
I got hit on my motorcycle yesterday by a guy in a rental. The cop said we had to call the rental place ourselves to get the guy's insurance info. My husband called today and they said they're not sure if the guy has insurance. They said he didn't get the rental's insurance, and he signed a waiver saying he does have his own ins. They said since he signed the waiver they didn't need to see his proof. That doesn't sound right to me!!! By the way, everyone is fine (except my bike). I did manage to keep my bike up though, that's a very good thing!
You have to show proof of insurance if you opt not to take the insurance they offer. But it's also important to know that if you have insurance you don't have to take theirs.
